the tank has to come down and a ring holds the unit in place has to be unscrewed off using a special punch and hammer as to not cause a spark and then once the ring is off you can pull the complete unit out of the tank and replace with a new unit.
Close to the thermostat housing.
Where is the oil sending unit on a 2000 dodge neon?
Which sending unit?
With a multimeter. The easy way is to unscrew, disconnect and remove the sending unit from the tank for testing. Once removed, connect the multimeter to the chassis of the sending unit and the isolated stud that was wired to the fuel a gauge. Depending on where the sending unit's arm is positioned different resistance values will result.
put the tank up in place and then use the 2 straps that hold it up and bolt the straps down and the tank is now in place, hook up the wire or wires to the fuel sending unit and your done.
Answer the oil sending unit on a 3.2 dodge engine is underneath by the oil filter.
how do you replace the fuel sending unit
Assuming this Dart has the slant six engine, the oil pressure sending unit is located under the oil filter. A single wire connects to it. The wire connection simply pulls off.
The 1997 Dodge Dakota oil sending unit is in the oil pan, on the bottom of the engine. You will need to remove the oil pan in order to view the sending unit.
The engine oil sending unit on your Dodge 2.7 liter engine is located in the bottom of the engine. The oil sending unit can be accessed by removing the oil pan.
The 2004 Dodge 5.7 liter engine temperature sending unit is located on the front of the engine. The temperature sending unit is just above the thermostat housing.
Yes it has an oil pressure sending unit next to the distributor.