disconnect the filler neck hoses (2), unplug the connector and unbolt the ground (you may need to lower the tank a little) with a good jack under the tank loosen the tank bolts and swing the straps out of the way. lower the tank down slowly keeping an eye on all the gas lines when you can disconnect the lines do so. finish lowering the tank and remove it, remove the metal ring from the tank with a screwdriver and hammer. remove the sending unit, the pump will come off when the coupler is slid down. enjoy the rust! install in reverse
You must remove the fuel tank , the fuel pump is located inside the tank.
the library should have a shop manual for this vehicle :)
It is inside of the fuel tank. It is a electric fuel pump.
the pump is found in the fuel tank
Pull the fuel pump fuse.
How is the easiest way to change a fuel pump on my k1500 Chevy pickup
It has an electric fuel pump and it is inside of the fuel tank.
IT is in the fuel tank. IT is in the fuel tank.
remove the bed of the truck.....
You are going to have to remove the fuel tank by disconnecting the hoses and wiring harness.Only then can you access the pump which goes in the top of the tank.
INSIDE THE FUEL TANK.
It is in the fuel tank.