0
How do you install a new license plate bulb on a 2004 Cadillac deville?
Wiki User
∙ 14y ago
There are two (2) bulbs. Gently remove the plastic lens, sometimes there is a slot for a very small flat tipped tool (screw driver) to remove lens. You will then see a white plastic clip, gently push to the side and pull down this will remove the bulb casing. Twist the bulbs out. If you purchase auto part bulbs, you must bend the two electrical wires to the sides of the bulbs or they will not work. Cadillac soldered the bulbs into the plastic holders, but it is to the side not the way the bulbs come. Otherwise you will need to purchase the bulbs from a GM dealer.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Where is the fuse for the rear license plate on a 2000 Cadillac deville?
what is the number for the fuse to change the rear license plate light. and is it the fuse box under the back seat or under the hood? The plate light is protected by the parking/tail light circuit.
How do you change the tag lights on 92 deville?
The following Instructions are for all 1991, 92, 93 DeVille Sedans and Coupes.Remove rear license plate.Remove 4 nuts underneath license plate.Separate license pocket (with reverse lights) from body.Remove license plate lamp socket from license plate pocket (1/4 turn counter clockwise)Pull bulb (straight out) from socket.Push new bulb into socket (line up blade to slot in socket).Install license plate lamp socket to license plate pocket (1/4 turn clockwise)Install license pocket (with reverse lights) on to body.Install 4 nuts underneath license plate.Install rear license plate.
Where is the ecu located in a 1993 cadillac Deville?
The ECU on a 1993 Cadillac Deville is behind the glove box. To remove the ECU, remove the bolt and pull down the plate.
How can you repair a 1998 cadillac deville license plate light?
my name is Jesse fondotsto replace a license plate light you first have to open the trunk of the car take out the carpet on the top of the trunk after that you will see two little black screws you take them out after you do that the silver peice will come off but before you can replace it you must take the two little screws out that are located right above the license plate. your welcome!
What size screw is needed to mount license plate on 1998 Cadillac STS?
The size of the screw needed to mount a license plate on a 1998 Cadillac STS is 1/4-inch?æby 1/2-inch. They make license plate kits that includes all needed hardware.
How do you change the license plate light on 1999 Cadillac eldorado?
Rear license plate lights replacement require that you remove the entire frame with reverse lights. Remove the 3 cover bolts on the inside of trunk, remove license plate, remove the for bolts holding frame to tyrunk lid, slide unit down and out and you will have to twist the bulb sockets and remove the bulbs and install in reverse.
Where can one acquire Cadillac license plate frames?
You can purchase Cadillac license plate frames online at either Amazon or eBay. You might also want to check your local car retailer, the usually can order them at the manufacturer and sell them to you.
How do you fix the fuse to the license plate bulb on 1994 cadillac deville?
pop your hood and find the what "FUSE PANEL" find the fuse marked Parking lights and replace it. Its that simple. it might not be a fuse have you replaced the bulb or checked your contacts from your wiring?
Change a license plate light on a98 lesabre?
Remove 1. Bolts retaining license plate lamp to bumper. 2. Socket from license plate lamp. 3. License plate lamp. 4. Bulb from socket. Install or Connect 1. New bulb to socket. 2. Socket to license plate lamp. 3. License plate lamp. 4. Bolts to retain license plate lamp to bumper.
How do you replace license plate bulbs on 2003 cadillac deville?
pop out the light assembly with a screwdriver and change the bulb. your receptacle may be taking in water at the car wash. duct tape over lens before going through automatic car wash.
How do you replace license plate bulb on a 2000 dodge neon?
== # Remove screws attaching license plate lamp to rear bumper # Remove lamp from bumper. # Remove bulb socket from lamp. # Pull bulb from socket. == # Install bulb into socket. # Install bulb socket into lamp. # Place lamp in position. # Install screws attaching license plate lamp to rear bumper.
How do you change the front side marker light on a 2001 Cadillac Deville?
You grab 3 tooth picks and a dog collar. Grab the collar and attach to the bumper, just before the license plate. Then take 1 tooth pick and wedge in sideways. Reverse to reinstall
