answersLogoWhite
Ford Taurus
Chevy Silverado
Ford Ranger XLT

How do you install a speed sensor on a 1995 Ford Taurus 3 OL for the transmission?


Top Answer
User Avatar
Wiki User
2015-07-15 21:11:47
2015-07-15 21:11:47

My mother has a '95 gl. Her speedo tweaks out after it goes above 50 mph. She replaced the gauges twice in the car and it still didn't fix the problem. I bought a salvage speed sensor for it. On the passenger side of the vehicle you need to gain access to the transmission. I removed the front wheel and the drive axle. Once you can access the faulty part remove the old and replace it with the new. One word of caution, I have heard that the speed sensor if not replaced properly you may risk messing up the transmission. Good Luck

Related Questions

User Avatar

where is the transmission speed sensor located on a 2005 ford taurus

User Avatar

The speed sensor on a 1999 Taurus is on top of the transmission. It is located directly under the number 2 cylinder.

User Avatar

disconnect negative cable to battery, disconnect plug from sensor, remove the 3 nuts and pull out.

User Avatar

its located just above the transmission pan usually on the back side of transmission

User Avatar

There can be as many as 6 speed sensors, so which speed sensor are we talking about? There are 4 speed sensors, one at each wheel, if we have antilock brakes. There is a output shaft speed sensor on the output shaft housing of the transmission on the passenger's side of the car, down behind the engine, and there is a turbine speed sensor on the body of the transmission over on the driver's side.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.