If you have air conditor, drop the vent/condenser package to the floor. Remove the six Torx screws holding the plastic cover over the gages,remove the two screws on the flat plate immediatly above the radio. Slide a straight blade screw driver through the slot between those two screw holes (poke around there is a spring clip that needs to be pushed backwards) pull unit out through front. To replace this with an aftermarket radio you can buy the mounting kit and do the extra work. I kust unscrewed the mounting plate from the old radio and opened the holes a little with a drill and bolted to the new radio (they all have a bunch of extra threaded holes on the side, one of the sets should work. I would buy the wiring harness kit (Circuit City Best Buy about $15) match up the new plug with the old dash one. Reverse the process to mount the radio (the clip on the mount will lock when you push it, radio will still wiggle, the two mounting screws will secure it) don't forget the bezel and antennae before mounting.
Yes.
No.
how to install a drive belt on a 2000 jeep wrangler 2.5 liter
The correct factory tire size for a 1994 Jeep Wrangler is 215/75R15.
No.
Yes, it will fit just fine.
Certainly, they are both YJ"s.
It just fits in from behind the dash, you will have better luck if you lower the heater first.
No, the 94 will be 5X4.5 and the 2010 will be 5X5
my jeep wrangler is starting to have a hard time to start in the mornings? my jeep wrangler is starting to have a hard time to start in the mornings?
Jeep Wrangler wheel lug patterns years 1987-2006 are 5X4.5
Al YJ's are compatible, 89-95