Follow the upper radiator hose to housing secured by 2 or 3 bolts--Thermostat is located in housing Drain about 1 gallon of coolant from radiator Remove housing Notice how thermostaat is installed in housing Clean both surfaces completely Install new thermostat and gasket Fill radiator slowly to prevent an "air lock" Start car and look for leaks Bring up to normal operating temp. with heater on and check coolant level
Look at crutchfield.com for detailed pictures and instructions.
fuse panel 1992 Oldsmobile regency elite
how do you replace the headlight switch on a 1993 cutlas ceria*
Remove the retaining ring from the top of the ignition switch. Pull the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.
On the 3.3L V6 it is under the radiator cap.
The 1993 Oldsmobile Cutlass Sierra thermostat is located on the front of the engine. You can follow the water supply line from the radiator to the thermostat housing.
folow your top radiator hose to the engine that is where the thermo stat will be at you will probly have to remove your air cleaner and throttle body to get at the thermostat housing
It is built into the alternator.
follow the top radiator hose where it goes back to the egine
where is fuel filter located on 1988 olds cutlas ciera?
The 1995 Oldsmobile Cutlass horn relay switch can be found on the firewall in the engine compartment. The horn relay switch will be on the drivers side of the firewall.
wher is the TPS located on a 96 oldsmobile ciera 3.1L ?