It connects to the pump, wherever the pump is located.
Get that to a windshield reseller...
Call a glass company to come and install it.
To install a windshield on a 1955 Thunderbird, start by carefully removing any old weatherstripping and cleaning the frame. Place the new windshield into the opening, ensuring it fits snugly. Apply a bead of adhesive or sealant around the frame, then press the windshield into place, ensuring it is centered. Finally, install the new weatherstripping to create a watertight seal and secure the windshield according to the manufacturer's instructions.
To install electric brakes, first remove the wheel. Then remove the dust cap, nut, and washer; this will be the place where you install the electric brakes.
Electric fences can be tricky to install if you do not have the proper directions. Here is a link to how to install an electric fence properly - http://www.afence.com/Electric_Fence/how_to_elecfence/elecinstall.htm
Most professionals can install a new windshield in about an hour, sometimes less if the car is common such as a Honda Accord. However, if you want to replace the windshield yourself the time will vary depending on the directions you have and the quality of the materials you use.
take it to a glass shop for $30- $50 dollars install.
They are all done about the same. go here http://www.wikihow.com/Replace-Your-Automobile-Windshield
To install a 1941 Plymouth windshield seal, first remove the old seal and clean the windshield frame thoroughly. Place the new seal around the windshield, ensuring it fits snugly in the channel. Apply a thin bead of adhesive if required, then carefully position the windshield into the frame, pressing the seal into place. Ensure a tight fit and check for any gaps before securing the windshield with clips or fasteners as needed.
take it to a glass shop they can do it for $ 40.00 max ...
Begin by removing the hose from your windshield washer pump. Remove the windshield washer pump wiring harness. Remove the windshield washer pump retaining bolts. Reverse the process to install your new windshield washer pump.
Remove the windshield wiper arm from the windshield wiper motor. Remove the wiring harness. Remove the retaining nut. Reverse the process to install the new windshield wiper motor.