you can buy a wireing harness that just plugs into your existing wires at a parts store, you do not have to cut any wires! just unplug back by your bumper and plug in the new plug. that's it.
Plug in the trailer harness into the 7 pin hookup next to the receive hitch if you have a stock towing package.
U-Haul sells a kit with instructions
very easy .I bought my wires on eBay ,,,the trailer harness plugs right into your lights no cutting at all
form_title= Trailer Lights form_header= Install trailer lights with help from pros. Do you have a commercial trailer?*= () Yes () No What color lights do you want to install?*= _ [50] How many lights do you want to install?*= {1, 2, 3, 4, 5, More than 5}
There are about 5 fuses for the trailer harness, Trailer Back up,Trailer left turn, Trailer right turn, Trailer Brake, and Trailer hazards. They are located in the underhood fuse box on the Drivers side of your motor. On my 2003 Silverado, the Trailer left/stop and Trailer right/stop fuses are located in the fuse panel just inside the driver's side door. (Not sure about the trailer brake or hazard fuses.....I wasn't having problems with those :). There is one additional fuse for the trailer harness. The 15A fuse for the trailer running lights is located in the fuse panel under the hood, next to the battery. The fuse is labeled "Trailer Park".
how do I install a trailer lights to a Honda 1998
Your local auto parts store can sell you a trailer plug harness that plugs into the vehicle's original harness that requires no cutting.
Try Here: http://www.suspensionconnection.com/cgi-bin/suscon/7208.html. Instructions come with the kit.
Check your fuses and look for a dead-short on the tail light wire (probably brown).
You need an adapter depending on the harness. I got one that makes a 5 wire system work with a four wire(difference being separate blinker and brake lights. I then went to uhaul and them put it in for $45.
Auto parts stores can sell you a trailer harness that plugs in between your existing truck harness. The electrical connection used is usually located behind the rear bumper on the inside of the left frame. Directions will come with the trailer harness kit.
I am having the same problam on a 1999 silverado have u got any help.