answersLogoWhite

0

There are two bolts to loosen, one at the top of the alternator and a smaller one underneath on a bracket. Loosen these and push the whole unit down this will loosen the belt so it can be replaced then use a lever to pull up the unit while tightening the bolts

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you install an alternator belt on 1986 GMC s15 pickup truck?

How do you install an alternator belt on a 1986 GMC s15 pickup truck


How do you change the alternator belt on a Volvo 240 dl?

Begin by removing the alternator tensioner bolt. Slide the alternator to the left. Remove the alternator belt. Reverse the process to install the new alternator belt.


Install 84 t bird alternator?

Loosen the tensioner pulley. The alternator belt will become loose. Take off the belt. Remove the wiring harness from the alternator. Remove the retaining bolts from the alternator. Remove the alternator. Reverse the process to install the new alternator.


How do you install new alternator on a 2001 v70 manual turbo?

Remove the alternator wiring harness. Loosen the tensioner pulley. Remove the alternator belt. Remove the alternator retaining bolts. Reverse the process to install the new alternator.


How do you replace an alternator on a 1991 buick regal?

Disconnect the 1991 Regal battery. Remove the alternator belt and wiring. Unbolt the alternator and install the new one. Reconnect the wires, install the belt, then reconnect the battery.


How do you tighten an alternator belt on a 95 Ford Taurus?

You have to install a new belt tensioner.


How do you replace the alternator on a 02 Daewoo nubira?

Remove the belt from the alternator. The belt can be removed by loosening the belt tensioner. Remove the wiring harness from the alternator. Remove the cables from the alternator. Remove the retaining bolts. Reverse the process to install the new alternator.


How do you replace the alternator on a 1994 Buick Century?

Loosen the alternator belt with the tensioner pulley. Remove the alternator belt. Remove the wiring harness. Remove the alternator retaining bolts. Reverse the process to install the new alternator.


How do you install alternator belt on 1983 El Camino?

loosen the alternator bolts up and push down on the alternator and take the old belt off and reinstall new belt over the pulleys and pry up on the alternator until you get about a 1/2" play in the belt when you push down on the belt and then tighten all the alternator bolts.


How does the belt install on the alternator of an 86 Firebird?

it has its own belt use the belt tentionadjuster located on the alt itself its a bolt


How do you change the alternator belt on a VW Cabriolte?

Disconnect the battery. Loosen the alternator bolts and slide the alternator to loosen the belt. Remove any other belts in front of the bad belt if necessary to get to it. Remove the alternator belt, and install the new one. Pull the alternator to the side to tighten the new belt snug and hold while tightening the bolts. Reconnect the battery


How do you install serpentine belt on1999 Camry?

You need to loosen holding bolt on the alternator. After that loose tightening bolt (also on the alternator). And loose the bolt attaching the alternator to the body of the engine if you do not do that you will not be able to move the alternator. After that loose the tightening bolt until you will able to remove the belt. Make sure that the alternator is loosen enough to install a new belt. Install a new belt, use the tightening bolt to set tension in the belt. The rule of thumb is you should not be able to turn belt around itself more than 3/4 turns. Tighten other bolts.