The factory hinges are welded in place. They can be replaced. The spot welds have to be drilled out and the new hinges are bolted in with backing plates. The cab side upper half of the hinges are the most difficult to replace. They require removing the entire dash assembly. There is a good possiblity that the original hinges can be restored by replacing only the hinge pins and bushings. The hinge pins and bushings are available at your local auto parts store. A good mechanic can do this with out replacing the whole hinge assembly. If the pins are worn beyond the bushings and have worn into the hinge bushing support some welding may be required to fill in the worn area.
fitted the hinges but door drops
No
I need passenger door hinges for my chevy aveo 2007
check out http://kitchenreacing.org/install_hidden_hinge.html
Take it to a body shop and have the hinges replaced.
Open the driver door.... its basically where the door hinges meet the body.
No door hinges and cabinet hinges are two different things. Door hinges are generally much larger than cabinet hinges. Cabinet hinges and door hinges are not at all the same. They are different sizes and can withstand different amounts of weight.
Door hinges are magnet
ejaculate on the door hinges to lubricate
The hinges on a 1992 Chevy S-10 are on the side. If any adjustments are needed for the door they can be made through there.
A familiar example of what hinges do, are the hinges that are attached to a door.
Open your doors, you may need to remove your fenders .Then find the nuts for the hinges, remove the nuts while supporting the door. Be careful of your door. Remove the hinges from the frame, replace, follow through in reverse.