Remove the outer skin. It has bolts on the inside of the door by the hinges and door opening side, plastic rivets on the bottom AND, REMOVE THE DOOR MOLDING. The door molding is best removed after removing the inner door shell. The plastic clips that hold the molding will break very easily. From the inside of the door, as you look at the molding connectors, the connectors has a little tab that must be slightly pressed up and then slid out. Also, you'll have to disconnect the locking rod from the door key.
You have rivets holding the motor in place, this is why you need to remove the inner and outer shell. Use a chisel to remove the rivets. The rest is in a manual I purchased at a auto store. Plan on at least a half day's work. I've replaced both motors and it was no fun.
Do you have to remove the window to take out the whole power window unit? Or better yet, how do you get it out???
Remove the inside door panel of your 1997 Mercury Cougar. Remove the wiring harness from the window motor. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.
You will need to remove the inside door panel of your Chevrolet El Camino. Remove the wiring harness from the window motor. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new power window motor.
Begin by removing the 1994 Chevy passenger side door panel. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.
Simply purchase the window motor first. Unbolt the other window motor that needs replacement then mount the new one into the correct position and bolt the place.
i just bought a dodge neon 2 days ago and i love it i just wish i could install an alarm system and power window motor. i have no idea i hope someone can answer soon
1. Remove the power window regulator2. Install a pan head sheet metal tapping screw through the sector gear and the backing plate at the hole provided to lock the sector gear into position. Then drill out the motor to regulator attaching rivets.3. Remove the motor from the regulator.To install:1. Lubricate the motor drive gear and the regulator sector teeth. Install the motor to the regulator and check the mesh of the motor to the regulator.2. Install rivets to the motor and the regulator.3. Remove the sheet metal tapping screw.4. Install the power window regulator.
I need to know the best way to remove and install the new window motor for a 96 Ford Windstar drivers side. Ray
Remove the inside door panel. Remove the window motor track linkage. Remove the wiring harness. Remove the window motor retaining bolts. Reverse the process to install the new window motor.
Hi .. To change the power window motor .. Remove the door shell of course You will see the motor for the window .. Unplug the power of course . The motor is actually riveted in so you need to drill out the rivets. Remove the old unit . Then install the new motor with self tapping screws . Plug in the power . Be sure to secure the window when you remove the motor so it doesn't fall. I have not done this yet but am about to embark soon and have done some research . Good luck ..
power window motor removal 93 sunbird
not easy pass to a qualified window and door expert