you would follow the spark plaug wires from the disributor to the spark plug and replace it. Spark plug wires are different sizes in length depending on where they go. Also make sure they are in the right order or your engine might run rough.
just twist and pull wire, do 1 wire at a time as you can't mix the places up they go
Nothing
No the spark plug wires have to be in firing order
Pull the spark plug wires off the spark plugs. Remove the spark plugs with a spark plug socket. Install the new spark plugs and put the spark plug wires back on. I recomend replacing the spark plug wires as well. If replacing them, just remember that the new wires are hooked up the same ways that the old ones came off.
call me 5 dollars each
no special order just one at a time
Remove the spark plug wires from each spark plug. Turn the spark plug out with a 5/8 deep well socket. Reverse the process to install the new spark plugs.
Mark and remove plug wires. Remove spark plugs and install new plugs. Reattach plug wire to correct plug.
find the wires and do one at a time as too not cross wires with different plugs
You should never need to replace the wires leading to the spark plugs. The 2003 Miata has a coil pack at each spark plug (inside the spark plug hole). The wires leading to the coils are low voltage and should never break down.
Try buying a new set of spark plug wires and install them one at a time.
A 2000 Concorde does not have plug wires. There are individual coils on each spark plug.A 2000 Concorde does not have plug wires. There are individual coils on each spark plug.
The spark plug wires on your 1994 Chevrolet Caprice are quite easy to change. The spark plug wires simply lift off on each end. Put the new spark plug wires on and push until you feel a click.