1 Un hook the batteries.
The starter is located behind the front axle on the drivers side of the engine just follow the positive battery cable.
2 Unhook the wires
3 Remove the three bolts that attach the starter. 10mm end wrench with 12 points will work.
4 Put on the new one and reverse the above steps.
It is in the side of the block behind the starter.
A 1997 Dodge with a Cummins diesel does not have an oxygen sensor.A 1997 Dodge with a Cummins diesel does not have an oxygen sensor.
Lower rear of driver side of engine.
It sits behind the starter on the drivers side of the engine. You will have to remove the starter in order to see it.
On the Cummins diesel the crank sensor is located in the side of the block under/behind the starter.On the Cummins diesel the crank sensor is located in the side of the block under/behind the starter.
1989 was the first year of the Cummins.
The Cummins diesel in a Dodge Ram does not have glow plugs, it uses an intake heater grid.
1997 Dodge diesels come with the 12 valve cummins engine. It is fully mechanical and does not have a camshaft position sensor. "Dodge cummins diesel forum" is a good resource for dodge cummins owners.
Yes Cummins diesel and a 4x4
If it has the 6.7L Cummins, then yes.
Cummins owns the engine. Dodge just offers the computer instead of cummins. Cummins is a private company it is not owned by Ford or Dodge.
17 mm to take off the cable, 12 point 10 mm for the starter bolts.