You need to remove the door panel. And disconnect it from the wires. After you have to remove the transparent plastic protection covering the door. Remove the screws holding the handle and disconnect the arms. Installation is reverse to removal.
you never gave me the answer.....
how do you install spring on interior door handle of a 98 chevy pickup
no
There should be two screws on the underside f the handle. Remove those, and the handle will come right off.
You will need to remove the door panel of your 1995 Toyota. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
check Mazda forum. Answer is within
It is not too hard. You will have to remove the door panel, then you will see how the interior handle is riveted to the metal door frame work. You will need to drill these rivets out and install the new handle with either rivets or screws.
Replacing the door handle on a 1997 Toyota Camry is easy with the proper tools chief among which is your check book. Start by going to the nearest Toyota dealer. The rest will fall readily into place.
The interior door handle on a Hyundai latches onto the locking mechanism of the door. First remove the old handle by unscrewing it from the door panel. Pull the handle out and remove the locking wire. Install the new unit with the locking mechanism in place. Tighten the mounting screw.
Drivers side, below E-Brake handle, facing downward.
You can replace the inside drivers door handle by removing the door panel. With the door panel removed the door handle mechanism will be visible. Remove the linkage from the door handle. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
Drill it out and when replacing use a screw.