Want this question answered?
Replacement lid for my rival roaster
I would doubt very much if you can get any replacement parts. However, stores like Source often have items like universal replacement knobs.
A Calibration Knob is a device that allows you to optimise something; for example, a Temperature Knob, Temperature Oven, Safe, and a Lock
To remove the knob there is quick release on the back edge of the knob, simply push the lever and the knob will pull off. To install a replacement knob simple push it onto the shaft until it clicks into place.
Look on the box, instructions, or other packaging to find contact information for Rival. The Rival manufacturer or company can likely provide you with a new knob, or point you in the right direction as to where you can find the right one.
Had same probllem on High. 2002 "The fan blows cannot control temperature via temperature knob on the dash?" Knob was useless. Turns out that the problem was the A/C/Heating control unit. Replaced under warranty $1000
Install an AFCI breaker on the circuit with the outlets you replace and you will be fine.
There is no set place to install the knob. Install it where it works for you. The most common location is at 10 o'clock or 2 o'clock. Know that it is illegal in most states.
There is one bulb for the manual heater control. It is located behind the fan control knob. Remove the knob take a piece of vacuum or windshield washer hose and remove the bulb. Install in reverse order of removal. The bulb is a 194 bulb.
To remove the shift knob on the 1999 Olds Intrigue look for the pin that is holding the knob in place. Remove the pin and pull up on the knob, replace kob and pin.
it,s under the dashboard behind the temperature control knob
Best left to a gunmsith