To install weatherstripping on a 1970 Dodge D100 you must at first open the driver door and roll down the window all the way. Stating at one end of the weatherstripping, pull off the stripping with your hands. If you are having trouble swab some acetone inside of the stripping to help release it. Clean the entire area where the weatherstripping once was with a swab and acetone. Make sure to get all of the old adhesive off of the car. Apply a line of new adhesive into the groove where the weather stripping will go. Also apply a line of new adhesive onto the part of the weatherstripping that will be pushed into the groove. Push the weatherstripping firmly into the groove on the door and hold it there for 10 minutes. Repeat steps one through five on the other door.
5x5.5
To my knowledge there should not be a diagnostic link on a 79'. most of the d100 trucks have a diagnostic port on the drivers side inner fender
sure grip
BIG job,costly. Replace with mopar eng. 318-360.
hi i have dodge sweptline d100-1969 please i need chromrear bumper thanks hussain440
The horsepower of a 1967 Dodge D D100 is approximately 258 hp.
I am not sure of how to instal a rear main seal on '89 dodge D100 with a v6.
10w30
Your D100 came with a 8 1/4 axle
Should be an A727 tranny. I have an 1989 Dodge D100 3.9 v6 and the transmission in it is an 904 a lighter version of the 727.
Try "Hemmings Motor News". Pick up a copy at your local news stand or go on line.
5x4.5"