0
The quick and easy way is to use a compression "Shark Bite" fitting. It slips onto the copper pipe and creates a tight fit. Then use a threaded or pex flex adapter for your for the connection.
Sweat on a male adapter to the copper pipe then just screw on the flex hose. You can also cut the pipe sweat on a tee then use a nipple and male adapter.
What else can I help you with?
What are the advantages of copper pipe fittings over plastic?
The advantages of copper pipe fittings over plastic is that copper does not bend or break as easily as plastic, so it lasts longer and is much more reliable as well.
Will methane gas turn copper pipe black?
no
How do you connect copper propane pipe and shutoff valve?
To connect a copper propane pipe to a shutoff valve, you will need to use a threaded fitting that matches the size and type of the pipe and valve. Apply pipe dope or Teflon tape to the threads before connecting them. Tighten the fitting securely using a wrench or pliers to create a leak-proof connection.
What kind of welding shall i use to weld copper pipe to aluminum pipe?
use duck tape it works on everything : D i have to agree, adhere it if you can, otherwise use a VERY low heat propane torch. Acetylene burns WAY too hot, and you won't get a good arc going over 2 types of metal. Also, I don't know if you can find a compatible filler rod though. If you do get the metals to stick together, becareful, if wont be very strong. Good luck The proper way to join aluminium pipe to copper is to use a threaded adaptor on the aluminium and add a copper adaptor . you then solder the copper.
How does copper and sulfur join to form copper sulphate?
Copper sulfate (CuSO4) is not a binary compound of copper and sulfur but a compound of copper, sulfur, and oxygen. It can be made by electrolysis of copper with sulfuric acid: Cu + H2SO4 --> CuSO4 + H2
Can you join 1 inch copper pipe to 28mm copper pipe?
I have recently had to join a 1 inch steel water pipe to a new copper 28mm pipe. You can do this using a 28mm comression joint. 1inch is just uneder 28mm in diameter but the compression joint takes up the difference and works without fault or leaks.
What fitting is required to join copper with galvanized pipe?
A threaded copper fitting on the copper side, male or female, and the galvanized is screwed into it.
How can I effectively repair a copper pipe?
To effectively repair a copper pipe, you can use a pipe cutter to remove the damaged section, clean the ends of the pipe, and then use a soldering torch to join a new piece of copper pipe using solder and flux. Make sure to follow safety precautions and practice proper soldering techniques for a successful repair.
Join threaded copper pipe?
By use of male or female, teflon paste or tape or leak block and then use A COPPER X MALE OR COPPER X fEMALE ADAPTER
How do you join a large plastic pipe to a smaller copper pipe?
If it is a pressure pipe, you would reduce the plastic down to the copper pipes size with reducer fittings and then use one to go to copper. If a waste line and the difference is not too great, you can use a rubber coupling that is the right size on each end and held on with hose clamps.
How can I use the push-to-connect method to join copper fittings securely?
To use the push-to-connect method to join copper fittings securely, follow these steps: Cut the copper pipe to the desired length using a pipe cutter. Ensure the pipe end is clean and free of burrs. Insert the pipe into the push-to-connect fitting until it reaches the tube stop. Check that the pipe is fully inserted by pulling on it gently. Repeat the process for the other fitting. Test the connection for leaks by turning on the water supply. This method provides a secure and reliable connection without the need for soldering or additional tools.
Can it be used for copper pipe?
I am sorry, but can you PLEASE rephrase your question? Can WHAT be used for copper pipe? When? How? Why?
What copper tube is available when using the grooved method of joining?
Grooved method? Threads on the end of the pipe? There is no tube or pipe in copper with threads. You can end a copper pipe with a connection that is threaded to accept steel pipe.
Could they damage a central heating copper pipe?
It is very easy to damage any copper pipe.
How do you connect copper pipe?
YOU thread or braze copper pipe Copper tubling you solder, braze, flaire, compression ring, mechincal joints
Is a copper pipe transparent?
no
How do you know if you have copper or steel drinking water pipes?
Galvanized pipe will be silver/gray color. Copper will be copper. Use a magnet, it'll stick to galvanized pipe but not to copper. Drinking water lines should not be black steel pipe.
