I drilled 2 small holes in the back and on the bottom of the lenses. Mine kept getting water in the lenses and fogging them up. I also had trouble with the water coming in contact with the bulb which would cause it to blow. I drilled 2 small holes in the back and on the bottom of the lenses. Mine kept getting water in the lenses and fogging them up. I also had trouble with the water coming in contact with the bulb which would cause it to blow.
After you take the headlight out, remove the metal clips holding the lens on. The lens has to be pried off because there is silicone there to keep it together
If a plastic lens, drill a very small hole at the bottom to let water drain out. If a glass lens, you will have to replace.
Where the lens meets the housing there is a seal, just replace it.
If you want to remove the BMW headlight lens simply follow the user manual.
how to replace the headlight
i have dropted the bulb into the headlight and i want to remove the lens to get it out any ideas thanks
Actually.. to take the headlight lens apart, put the Oven on 200, put the headlight assembly in oven for a few minutes at a time, as the headlight assy heats up, the adhesive will loosen up making it easy to remove the lens. For a demonstration, go to Youtube and type in "How to remove headlight lens from assembly"
Your headlight is leaking, allowing water to enter the lens. when it is on water will burn out the bulb.
Yes
If this is a Camry,and the headlight lens is broken,you would have to buy the whole assembly,not just a lens. If the headlight lens is discolored[being that it is plastic]there are products to make them clear. Go to E-bay motors and look up headlamp cleaners..A good product..........
APART FROM THE BONEYARDS, THESE LENS ARE NOT AVAILABLE SEPERATELY.
how to change the headlight lens on a grangcherokee jeep