answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How do you know if a evaporator cooler is bad in a 2002 pt cruiser and how do you remove and replace one?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace the thermostat on your 1991 4-runner?

remove glove box. disconnect harnesses and remove evaporator and thermostat is behind it. remove glove box. disconnect harnesses and remove evaporator and thermostat is behind it.


How do you replace front evaporator 2003 silverado?

The evaporator in the '03 Silverado is under the dash on the passenger side. Unfortunately to replace it, you have to remove the front dash. This is probably one where you will need to take it into the shop.


How do you replace the thermostat located on a Oldsmobile Custom Cruiser?

remove old thermostat and replace with new thermostat and gasket


How do you replace the evaporator 1997 xj6?

The entire, and I mean ENTIRE front dash has to come out to remove the heater box which then must be disassembled in order to replace the evaporator or heater core. Not a job for the feint of heart.


How do you replace center motor mount on pt cruiser?

Remove the engine .....bugger of a job


Do you need to remove the intake manifold on your 2003 PT cruiser to replace to thermostat?

No, but it does make it easier.


How do you replace oil cooler lines on a 2001 2500 HD?

do you remove motor mount to remove oil cooler lines on 2001 chev 2500 hd 4x4


How do you replace a radiator on a 2001 PT Cruiser?

Remove the battery, radiator support brackets, battery air filter housing, and air filter hose. Raise the vehicle, and drain radiator. disconnect the transmission cooler lines, and the radiator fan. Unbolt the radiator an remove. Reverse the process to install.


How do you replace the evaporator in a 1988 Honda Accord?

How to remove the evaporator on your Honda1-evacuate ac system of 134a,2-discoonect ac lines at firewall,3-remove glove box door and glove box4-Disconnect fan motor and remove5-disconnect all connectors on evaporator housing6-remove bolts holding evaporative housing to firewall7-remove evap. housing from vehicle8-remove screws holding evap. housing together9 remove evaporator from housing10-remove expansion valve from evap.Reintsall in reverse order


Must you remove PT Cruiser transmission to replace engine?

Yes, they come out the bottom at the same time.


How do you remove the evaporator from a 1968 mustang?

There is no evaporator on that model.


How do you remove the evaporator core of a 1998 Pontiac Bonneville?

Before you remove the evaporator core from a 1998 Pontiac Bonneville you need to have the air pressure discharged. You will then need to remove the AC unit. You will need to remove some screws before you can remove the evaporator.