0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What can cause only one high beam to light on 2000 Chevy Tracker when the fuses are OK and there are no broken wires and the bulb is good?
How do you know the bulbs are good?, looks can be deceiving. i just had the same problem ... the high beams worked but the low beam was burnt out.. just replace the bulb and it works fine..
Headlight low high beam problems?
It would be helpful to know what kind of problems you're having and the kind of vehicle its on including make, model, year. If your low beams are not working or if one is not it may just be that you have a bad bulb. Usually the high and low both come from the same bulb and its intirely possible that a low beam filament is burnt out but the high beam filiment isn't (typically the low beams are used way more than the high). If this isn't the case then more info would be necessary in order to further diagnose the problem. Good luck and we look forward to hearing from you again about this.
When replacing the headlights on a 1994 cutlass sieRra how do you know which one is the high beam which is THe low beam?
Assuming that one side is still working, turn on your lights in low beam, get out of car and look. Then turn on the high beams and look again. See sources and related links below for bulb info.
Where is the relay for the left high beam on a 1989 Nissan skyline?
does nissan skyline have a relay for high beam hidden somewhere ? if you know let me know ,have low beam but not high and the bulbs are fine
Why won't heam beam headlights on 1974 vw beetle work when low beams do?
If low beam works but high beam doesn't then: It is unlikely that both headlights burnt out the high beam filaments at the same time. I'd check each headlight beam with another headlight beam you know is working on both high and low beam filaments. If this works the higb beam, then the beams are no good. Another check, to make sure that both filaments in each headlight are working, is done by connecting 12 volts of power across the three terminals at back of the beam (negative to ground terminal and positive to first the lowbeam terminal and then the highbeam terminal). If both filaments light, headlight beam(s) are good. Brightest light is highbeam. If in doubt as to which terminal is which, look at the connector, the white wire is Highbeam, the yellow wire is lowbeam, the third wire is ground. So, now you know the headlight beam are good, but if problem is still not fixed, check the fuse for high beam. See your owners manual for location, or just check all the fuses. If the high beam fuse is OK, check the dimmer switch. If looking at the dimmer switch, the middle wire (56 termainal) is white with black stripes, this is the power in to the dimmer switch from the headlight switch (dash). The left wire (56b terminal) is yellow and it is the low beam power from dimmer switch to fusebox, the right wire (56a terminal) is white and it is the High beam power to fusebox. If the low beam works as you say, a quck check of the system and the dimmer switch, is to exchange the yellow (low beam) wire and the white wire (high beam). If the high beam nowworks but the low beam doesn't, and the fuses are all good, then the dimmer switch is faulty. If the fuses are not OK, check all the wiring first. Check to make sure all the wires are connected from headlight switch to dimmer switch to fusebox to each headlight. Look for shorts (burnt wires) in the curcuits, since if the fuse(s) burnt out, it did so for a reason. Repair first any burnt wires. Replace the fuse with the same sized fuse. This should fix your problem.
How do you replace the hid bulbs on a 2001 Acura CL?
I had to pull off the front bumper to replace the ballast and high and low beam bulbs. that's the only way that I know. I had to do this 2 times when the other bulb went out.If the bulb you replace does not work then it might be the ballast.
How do you know what is wrong with your 2000 buick regal ls when you have high beam headlights but not low beam?
It may be simply that you were running with only one low beam instead of 2 and both are now burned out. If not, then the high beam switch or relay went bad.
Why do my blinkers blink too fast and my rear brake lights not work?
That bulb is burnt out. When the circuit is not completed like with a blown bulb, the flasher unit will blink faster to let the driver know something is wrong with that side. It should only be faster with the side that is burnt out.
How do you replace low beam bulb 2008 Colorado?
try coloradofans.comit as everthing you could wanna know about colorados, it has helped me out sooo much
What is the purpose of a beam?
Well with a beam it allows the bridge to support the bridge
How do you change front passenger turn signal light bulb or head light bulb?
The 1696 Ford Escape Headlamp bulbs are accessable through a panel under the hood. It has a wire holding it closed, just push down, and it should move. The instructions in the manual are accurate for the Low Beam, unplug it by squeezing the tab, and pulling down. The High beam instructions are WRONG. This one unplugs, and you have to turn it. You use the base like a key, and it should turn counterclockwise. I don't know how to change the turn signal bulb, I am still looking. THIS ANSWER HAS BEEN 'CUCED'!
How do you know if your boyfriend burnt you?
You'll know if he burnt you if you saw him burn you with something really hot.
