If the core is leaking water into the floor board on the inside of the car it is bad,check to see if your floor mat and/or carpet is wet if so replace.If the core is clogged up it is bad. Feel the heater hose under the hood ( there are two of them one beside the other) after the engine is hot both hoses should also be hot. If only one is hot the core is plugged. Disconnect both hoses from the engine and try to flush the core with a water hose ,spray into one hose water should come out the other. If water is not coming out other hose replace core. Hope this helps . MKIE K.
theres no easy way dash have to come out.
The 1996 GMC half ton pickup truck heater core can be removed by removing the heater core retaining bolts. Remove the heater core water lines. Reverse the process to install the new heater core.
www.tirerack.com
What are the steps to change the heater core on a 1991Chevy S10 pickup ?
beside the engine
Heater core? Inlet or outlet hose fitting at heater core?
Remove the water supply hoses from your 1993 Chevy Corvette heater core. Some water will drain out of the hoses and the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
try - heater - core - that was my p
i need to know how to replace the heater core on my 1992 s-10 pickup
Where is heater core located on 92 chev
The heater core comes out from the inside. If you have air it is a little harder. Remove the dash bolts it does not need to come all the way out. also remove the glove box this will help you remove the heater box which the heater core is behind pretty easy after the dash is out of the way hope this helps
You can find the heater core behind the kick plate in your 1993 Acura Legend. Remove the water hoses. Remove the heater core retaining bolts. Reverse the process to install the new heater core.