Want this question answered?
If your dipstick reads "Full", then you do not need to add any fluid. Be certain to follow manufacturer instructions when checking fluid level. Your torque converter is part of the transmission, when speaking of fluid, so if the transmission is full, the torque converter is also.
The code p1762 in a Grand Cherokee shows possible transmission problems. Low transmission fluid could be the cause. Make sure that the fluid is full then check again.
Transmission fluid will show full when it is cold, but low when it is hot if it is low on fluid. Transmission fluid has to be checked when the car is warm.
there is no dip stick, there is a plug under the transmission that you have to take out and if fluid comes out it is full, it is only a 1/4 inch plug.
If the fluid fluid is full, you have an internal failure.
The transmission may not be building up pressure until the fluid warms up. Check the fluid level to make sure that its full, then check the transmission filter as it could be stopped up.
Add transmission fluid until the dipstick reads full.
how much trans fluid from empty to full
The 2 lines that come from the transmission and go to the radiator are full of transmission fluid and the radiator is what cools it.
The fluid level is checked by loosening an Allen head bolt in the transmission pan. If the fluid starts to leak out, it is full. If not, it needs transmission fluid.
what is the problem when the car will not go in drive or reverse? and the transmission fluid is still full
This vehicle does not have an automatic transmission dipstick for measurement. To check fluid level, the vehicle needs to be raised up on a lift and must be level. From underneath, locate a small plug on the passenger side of transmission housing. Remove that plug and if the transmission is full the fluid will dribble out the opening. If fluid is needed it is added at the transmission fill cap on top, drivers side.