If you are certain the battery has a good charge and the solenoid is good, then your last choice is to remove the starter for a bench test. Hold it firmly on the bench and apply 12 volts from a battery charger for a second or so. Hold negative on the casing and touch pos. to the main terminal.
It will not turn over on the starter motor.
When the starter motor refuses to turn over or grinds and clicks when turning then you need a new motor or recondition the old one.
Follow the red battery cable which will eventually lead you to the starter.
The starter motor is at the rear of the engine.
The starter motor is at the rear of the engine.
You can find the starter on the right hand side of the motor. The starter will be near the back of the motor. You can follow the positive battery cable to the starter.
You can turn the key to the "run" position, and jump across the solenoid with a screwdriver or something metal. If the starter turns, you have a bad solenoid.
if the starter is not spinning and the truck motor is running
To locate the starter motor you open the bonnet then look between the radiator and the gearbox you will then see the starter motor the live wire coming from the battery goes to the starter motor so just follow that. The starter motor is held into the gearbox with 3 bolts and a bracket at the other end. This bracket needs removing before you undo the 3 main bolts as the starter wont come off with this bracket on.Make sure you know where the wires go when you put it back together
Which connects starter motor and the battery temporary to get sufficient power to starter motor.
It starts the motor.
how do i remove the starter motor Mazda rx8