they are numered on top of piston number one cylinder is the front hole also coneting rod bering caps are numbered wit a arrow that points forward
As far as I know bore and stroke is 66x57 but check to make sure.
S&W never made a piston as far as I know.
you probobly don't want to know... you have to remove the front differential! or you can pull the whole engine...both are equally daunting tasks.
No a sidekick does NOT have a camera! We don't know why.....
First we have to know Automatic or manual. A/T is easy: add the fluid in the same place as the dipstick. M/T you have to get under the car...
there are 2 systems. in 1995 , the car was sold with both r12 and r134, different major parts. so are not interchangeable. 95 and back, but 94 and back can be. but 96-98 is a family. and are compatible. hope that helps. http://www.kick-fix.com/air-conditioning.html I am pretty sure it will, I know a '96 sidekick or tracker will fit. Most of the sidekick tracker stuff works. Check out the x90 yahoo group, very helfpul there.
That is a stock bore 93-01 KX250 Piston. The part number 617M06640 is a Wiseco number. I know as I have the same bike and this is the piston kit I used. Very good piston. Do not be suckered into a single ring piston as it will not last as long.
2000 according to that number
After you have located the clutch slave cylinder, have someone depress the clutch pedal. You should see the piston of the slave cylinder extend somewhat. If it does not, either the slave cylinder is bad, or the master cylinder, or, there is not enough brake fluid in the system for it to operate properly. Check the level in the master cylinder. If the slave cylinder is leaking profusely, it is probably bad.
You don't because I don't have a Suzuki 300. Maybe you should ask "How do I know the year of my Suzuki 300/"
she have a sidekick, but i dont know if she still has it.
I NEED TO KNOW WHERE I CAN FIND THE VIN NUMBER FOR GEMMA 250 I NEED TO KNOW WHERE I CAN FIND THE VIN NUMBER FOR suzuki scooter GEMMA 250