0
How do you lineup distributor to cylinder number 1 on a 5.7 liter Chevy engine?
Wiki User
∙ 13y ago
Remove all spark plugs and turn the engine over until the #1 piston is at top dead center (TDC) on the compression stroke. The rotor should be pointing at the #1 plug wire connection on the distributor cap. Rotate the distributor if necessary to line it up.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Where is the number 1 distributor peg on a 1986 Chevy S10?
The number 1 cylinder is located at the front left of the engine block while FACING the engine. Follow the spark plug wire to the distributor a POW there it is.
When timing a 350 engine does the distributor point to the number one piston or the number one spark plug?
Yes the rotor should be pointing to the #1 cylinder when you are installing the distributor.
Where is number one cylinder on the distributor cap of a volkswagen polo?
in the engine compartment hidden under the valve chamber
Firing order and cylinder location and distributor rotation for 2.8L V6 Chevy?
Firing Order: 1-2-3-4-5-6 Distributor rotates clockwise. Number 1 cylinder is located front of engine right side when looking at the engine from the rear.
What is the rotor position for the number one cylinder on a 1976 Dodge 360 engine?
The marked # 1 position on the distributor cap faces to the FRONT and center of the engine
Position of number one cylinder on distributor cap and engine on 1994 Chevy 3500 5.7?
The #1 cylinder is ALWAYS right front when looking over the radiator. Driver's side front. Can't help you with the distributor. Sorry
How do you remove the distributor on a 4 cylinder Chevrolet Celebrity?
To remove the distributor on your Chevy Celebrity 2.5L 4 cylinder engine: 1, Set the timing to the number one cylinder in the firing position. 2. Remove the distributor cap and put out of the way. If you take out any of the spark plug wires make note of where to put them back. 3. Loosen and remove the retainer clamp and its bolt. 4. Pull the distributor out of the block. To reinstall the distributor reverse the instructions. You will need to re-time the engine when you put the distributor back in.
Where is 1 on the distributor cap order of a 1995 gmc truck 350 engine?
Number one is designated by where ever the spark plug wire from the number one cylinder is placed. Number one cylinder is the first cylinder on the the drivers side at the front of the car.
Took the distributor out of a 1995 acura integra ls and i forgot how it came out how do i put distributor back?
You have to take the spark plugs out, manually turn the engine over until cylinder number one is at top dead center, then turn the distributor until it points to cylinder number one and re-stab it. Normally an advanced procedure. If you get it wrong, it can cause engine damage. I'd have it taken to a shop.
Where is number 1 cylinder on distributor cap for 1994 e-150?
On the 5.0 liter and 5.8 liter V8 engines , # 1 on the distributor cap faces to the REAR and slightly towards the drivers side On the 4.9 liter straight 6 cylinder , # 1 on the distributor cap faces AWAY from the engine
Where is no1on a ford 5.0 distributor cap?
The number 1 position on the distributor cap of a Ford 5.0 liter / 302 is : It faces to the REAR and towards the number 7 engine cylinder ( in every picture I have seen in repair manuals ) The engine cylinder locations are numbered : firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of vehicle
Where is the number 2 cylinder on a 1996 Mercury Villager?
Number @ cylinder is located at the front of the engine nearest the distributor and closest to the grille. FYI, the distributor rotates counter clockwise. ------------------------------------------------------------------------------------------------------- Just adding to the answer : firewall 1-----3-----5 2-----4-----6 front of Mercury Villager V6 > driver
