0
How do you loosen the adjuster on the rear wheel alignment bar on a 1997 Intrepid?
Wiki User
∙ 13y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Does a 2004 Dodge Intrepid require a 4 Wheel alignment?
Yes.
Is 2002 intrepid front wheel drive?
Yes , the 2002 Dodge Intrepid is front wheel drive
How do you reattach a kids bicycle chain?
Loosen rear wheel axle nuts on both sides, slide wheel slightly forward. Set chain in place on chainwheel and sprocket. Slide wheel towards the back until chain is decently tight. Check wheel alignment, If OK, crank down on axle nuts. Check alignment again. If OK - Go ride.
Does the 2000 Chrysler lhs front wheel drive require a 2-wheel alignment or 4-wheel alignment?
Four wheel is preferred.
What is the difference between wheel alignment and wheel balancing?
wheel balancing is to balance four wheels. wheel alignment is to straight four wheels.
Does a wheel alignment machine needs to be calibrated?
Yes, wheel alignment machines do need to be calibrated.
What exactly does a wheel alignment do for a car?
A wheel alignment is what syncs your steering wheel with your wheels. It ensures your car will drive straight when your steering wheel isn't turned.
Is a rear and front wheel drive 2001 2.7 Dodge Intrepid motor the same?
The Dodge Intrepid was always front wheel drive.
When do you need front alignment vs 4 wheel alignment?
if you have independent suspention front and rear chances are a 4 wheel alignment can be done typically front wheel drive vehicles but not all.
Which technician would be used for an used car wheel alignment?
An alignment tech.An alignment tech.
Should you balance your tires before or after an alignment?
Before-a bad alignment cannot "unbalance" a wheel, but an unbalanced wheel, if bad enough, can throw off an alignment.
How do you adjust front brakes on a Honda trx450?
Raise the front wheels off of the ground, remove the red rubber plug on the hub, turn the wheel until you see an adjuster wheel (there will one for each brake shoe, two per wheel), turn the adjuster wheel with a small pry bar in the direction of the arrow next to it, the adjuster will stop turning when the brake shoe contacts the drum, back off the adjuster 2 clicks and continue to the next adjuster.
