flip the stock spindels but you only get a couple of inches.. if you want more.. then you gotta get aftermarket stuff.
The front dash speakers in the 89 Mazda b series pickup trucks are 4".
she would get hot or leak or you would hear a funny noise in the front
I have a 88 B2200 and i did a 318 V8 swap. Wasnt hard. Added coils to front. Welded in the mounts and changed nothing else. Fast but managable.
Coolant temperature sensor is locatedat the front of the intake manifold near the upper radiator hose.
It's the one closest to the crankshaft pulley, or the front of the engine, the front of the truck. Assuming it's an inline engine, not a v.
There is one just under the steering wheel to the left and the main is under the hood on the passenger side near the front
Yes you can.The 86-93 model mazda b series trucks have the same bumper and mounting points while some designs are different in LOOKS like with chrome or trim on them.They are interchangeable.The end caps are the same except on the four wheel drive trucks(this is just specific to those).Ok simple swap is A OK!
Well on my 1987 it is stamped on the driver side frame rail (with the left front wheel removed) you can see the serial numbers stamped into the metal at the curveature behind the shock going toward the fender weld.Should be the same for your model.Easy.
Yes, Nissan Titan rims will fit the Mazda B2200, B2000, and B2600 with some modifications. Either the centering hole needs to be bored by a machine shop to 4 inches or the centering tabs on the front hubs and rear brake drums need to be ground off. Attached is a link where you can see how they actually look on a Mazda truck.
Four inch for the two front speakers mounted in the dash.Six and a half inch for the rear if you have a cabplus truck.Any audio store will have your specs for what will fit in most cases.
If you are facing the distributor cap from the passenger side, starting at nearest to the front of the truck and going clockwise the sequence is 1-3-4-2. The timing check page below illustrates this.
The firing order on all 86-93 Mazda B2200s is 1-3-4-2 when facing the distributor from the driver side it turns clockwise. The terminal facing the front of the truck on the distributor cap is #1. Below are some related links that should help.