Well on my 1987 it is stamped on the driver side frame rail (with the left front wheel removed) you can see the serial numbers stamped into the metal at the curveature behind the shock going toward the fender weld.Should be the same for your model.Easy.
where is the location of chassis and engine number of kia picanto 2004 model
according to a local dealer that model has no modulator valve on its automatic transmission sorry !
you don't the lash on a 90 model is not adjustable. the valves are hydrolic,unless they have been replaced with manual ones.
Yes, a Mazda B2000 is most definitely a 4-cylinder with a 2.0L engine. However, technically Mazda didn't produce the B2000 as a 1988 model. It was made in 1986-1987. Then in 1989 Mazda made the B2200 Pickup, which is a 2.2L 4 cylinder.
sometimes it is on a sticker on the inside of the frame.
It is below the drivers seat
The third digit of the chassis number will be the year of manufacture. For instance, if the chassis number begins 390xxxxxx, then it's a 1970 model year
Yes you can.The 86-93 model mazda b series trucks have the same bumper and mounting points while some designs are different in LOOKS like with chrome or trim on them.They are interchangeable.The end caps are the same except on the four wheel drive trucks(this is just specific to those).Ok simple swap is A OK!
for the long bed 17.4 and short bed 14.8 this is for the 87 model standard cab or cabplus depends on which model you have.This is straight out of the manual!!!
The part your inquiring about is not on your year model or engine.Unless I missed something it was offered only on the rx7 and 3.0 liter engines for 1988.Easy.
there isn't a number or number plate these are used for racing because i am in the british championships.
The schematic diagram of the fuel injection system of a 1992 Mazda B220 can be seen in the service manual of the said model. This can be acquired by contacting the vehicle manufacturer or service centers.