10 mM Tris pH 7.5 and 1mM EDTA pH 8.0
For 1 L : 10 mL of 1M Tris-Cl pH 7.5 and 2 mL of 500mM EDTA pH 8.0
1 ml of 5X TE in 4ml distilled water (or).......if u want 100 ml just multiply 1 and 4 with 20....you will get 20 ml 5X TE in 80 ml distilled water
The stocks are commonly labeled as X factors such as 10X, 5X, 100X etc. X-factor indicates that the solution is concentrated and must be diluted usually with water to 1X concentration for use. For eg: - A 100X concentrated solution should be diluted to 100 fold. to convert 1X to 10X take one ml of 1x buffer in a measuring cylinder and dilute it to make it 10 ml. its now 10x buffer.
to make 500ml of 1x TAE solution we have to take 5ml of 100x TAE solution. mix it in 495 ml of deionized water.
This depends on the final volume you intend on making. Say you want to prepare 500 mL of 1X TAE. You will need 10 mL of 50X TAE to prepare 500 mL of 1X TAE.
TE buffer is a often used as a buffer solution in molecular biology, mainly in procedures involving DNA or RNA. The purpose of TE buffer is to solubilize DNA or RNA, while protecting it from degradation.
It is a buffer used in biology. "te" is derived from its components: t from tris, a common pH buffer, and e from the EDTA, a molecule. The purpose of TE buffer is to solubilize DNA or RNA, while protecting it from degradation.
The main difference is in composition. In TE common Tris buffer is bring down to pH 8 with HCl and EDTA is involved but in TAE instead of Tris HCl in TE Tris-acetate buffer is used.
TE is used as storage buffer
I think you mean electrphoresis buffer ( anyway the principle is the same for all sloutions,, simply it is chemistry ) if so , you'll need to take about 25 ml from your 40X buffer and complete them till 1000 ml with distilled water. The calculation can be done as the following N * V = N' * V' so 40X * Z = 1X * 1000 Z is the amount of 40X buffer needed to be diluted to give us 1L of 1X buffer so Z = 1000/40=25 ml
0.04 M Tris-acetate, 0.001 M EDTA
10x to 1x is a 1:10 dilution Therefore, add 1 part buffer, 9 parts DI-water If 100uL is 10uL (1 part buffer) and 90uL (9 parts DI-water) Then, 200ul (100 x 2) is 20uL (1 part buffer) and 180uL (9 parts DI-water)
tris, EDTA (TE solution) and NaCl, TNE buffer is a buffer solution used in molecular biology, especially for DNA and RNA