I think you mean electrphoresis buffer ( anyway the principle is the same for all sloutions,, simply it is chemistry ) if so , you'll need to take about 25 ml from your 40X buffer and complete them till 1000 ml with distilled water.
The calculation can be done as the following N * V = N' * V'
so 40X * Z = 1X * 1000 Z is the amount of 40X buffer needed to be diluted to give us 1L of 1X buffer
so Z = 1000/40=25 ml
10x to 1x is a 1:10 dilution Therefore, add 1 part buffer, 9 parts DI-water If 100uL is 10uL (1 part buffer) and 90uL (9 parts DI-water) Then, 200ul (100 x 2) is 20uL (1 part buffer) and 180uL (9 parts DI-water)
Atoms are frequently measured in picometers. A picometer is 1x10^-12m, or 0.000000000001m. as per me, it is measured in fermimeter, which is 1x 10-15 m.
Depends on the concrete An empirical equation is 4500*sqrt(R) where R is the nominal compression resistance (usually 30 MPa) R needs to be expressed in MPa in this equation
The "weight" of the object is expressed as a force 39.36 N where a Newton has units of kg .m. s-2 As the gravitometer is registering that the acceleration due to gravity is 9.83 m s-2 we can work out the mass of the object M as fllows M.g =39.36 M= 39.36/9.83 = 4.004kgs Looked at another way: A 1kg mass would exert a force of : 1X 9.83 measuered in Newtons The force observedcaused by the object (its weight) is 39.36 Newtons so we can work out the mass as 39.36/9.83 = 4.004 kgs Note that the units are kgs because Newtons are defined in terms of a kg.
The stocks are commonly labeled as X factors such as 10X, 5X, 100X etc. X-factor indicates that the solution is concentrated and must be diluted usually with water to 1X concentration for use. For eg: - A 100X concentrated solution should be diluted to 100 fold. to convert 1X to 10X take one ml of 1x buffer in a measuring cylinder and dilute it to make it 10 ml. its now 10x buffer.
To convert 3x to 1x, you can simply divide 3x by 3. This will give you 1x.
This depends on the final volume you intend on making. Say you want to prepare 500 mL of 1X TAE. You will need 10 mL of 50X TAE to prepare 500 mL of 1X TAE.
A 1X buffer refers to a buffer solution that is typically used at its full strength, without any dilution. It is commonly used in laboratory settings for various biochemical and molecular biology applications to maintain a stable pH and ionic strength for reactions.
To prepare 1X TE buffer from 5X TE buffer, you would dilute the 5X TE buffer by mixing 1 part of the 5X buffer with 4 parts of water. For example, mix 1 ml of 5X TE buffer with 4 ml of water to obtain 5 ml of 1X TE buffer.
how do you beat level 37 on 40x escape
0.04 M Tris-acetate, 0.001 M EDTA
10x to 1x is a 1:10 dilution Therefore, add 1 part buffer, 9 parts DI-water If 100uL is 10uL (1 part buffer) and 90uL (9 parts DI-water) Then, 200ul (100 x 2) is 20uL (1 part buffer) and 180uL (9 parts DI-water)
Press the first button 1x the second button 2x then 3x then 4x
1x PBS buffer typically has a molarity of around 0.01 M. To prepare a 20 mM PBS buffer, you would need to dilute the 1x PBS stock solution with water. For example, to make 1 liter of 20 mM PBS buffer, you would need to mix 2 ml of 1 M PBS stock solution with 98 ml of water.
you hace to press e 1x s 2x c 3x a 4x p 5x e 6x
to make 500ml of 1x TAE solution we have to take 5ml of 100x TAE solution. mix it in 495 ml of deionized water.