0
This is usually done by passing an electrical current through the wire.
Wiki User
∙ 6y ago
Add your answer:
Earn +20 pts
How do you make simple dynamo to glow a bulb?
By attaching a fan in the dynamo and rotating the fan and connecting one end of wire in the dynamo and another end in a bulb which helps in glowing of bulb by using the power of dynamo.
When one terminal of the cell is joined by copper wire to the one terminal of bulband another terminal of cell with aluminium wire to the other terminal of bulb. Will the bulb glow Give reason for yo?
Both copper and aluminium wire will conduct electricity, so the bulb will glow. Aluminium is less efficient at conducting than copper. Copper-clad aluminium wire is electrical wire coated with a thin layer of copper.
Will two batteries and a wire make a light bulb light?
first of all, you need a bulb, a wire, and ONE light bulb. You clip the wire on the battery and touch the wire on the bottom of the light bulb
What cant be use complete a circuit to make a light bulb glow?
A simple circuit contains: Power source - battery, wall outlet Path - wire or other conductor Load - light bulb Start with a small light bulb... see if you have extra bulbs for the car, tail light bulbs for example. Hook one wire to a pole on a 9v battery, then the tip of the light bulb's connection end. Then a second wire on the side of the bulbs connection end, and return to the source.
How do you make a led glow by the help of battery?
Connect one wire from the LED to each of the terminals on a battery - provided the battery has enough power, the LED will glow !
How do you make a circuit with a light bulb and battery?
Get your bulb, it should be a very small wattage (weak) one, get your battery and wires, connect one wire to plus side of abttery and other wire to minus side of battery, then connect to the bulb, you may have to play around a bit to find a connection that produces light.
What describes electricity flowing from a battery though a switch to a light bulb?
Circuit Electrons flow form the positive end of the battery through the wire connecting the positive terminal to a switch. The other end of the switch is connected to one terminal on the bulb, the other terminal of the bulb is connected to the negative end of the battery. No electrons (current) flows as long as the switch is open. Once the switch is closed and if the battery has enough voltage and current capacity to make the filament in the bulb glow, then the bulb emits light (together with wasted heat). If the switch is open, no current flows through the entire circuit and the bulb does not glow.
What will happen if one battery terminal is connected to a light bulb?
Nothing will happen. It requires two wires to complete the circuit. Electrical current travels from the battery terminal through the wire to a metal portion of the base of the lightbulb. The current then travels up through the filament wire which glows as the current travels through. The current then travels back down the other side of the filament wire to the base of the bulb and thus through the second wire back to source, which is the battery.
Why the bulb is not lighting when one wire or terminal is not connected?
When one wire or terminal is not connected to a light bulb, it is not possible for electricity to complete the circuit. When a circuit is not completed, the bulb will not light. An off switch, for example, breaks the circuit.
How could you use a magnet to make the bulb light up?
This may take quite a bit of effort, as most incandescent light bulbs use a fair bit of current. Find the smallest bulb with the lowest operating voltage, from a small flashlight. Get as many turns as you can from your piece of wire, wrapping it around and around. Connect the bulb across the ends of the wire. One end goes to the centre contact and the other to the side of the bulb. (assuming a small Edison screw type bulb.) Now move the magnet rapidly inside the coil you made with the wire. The lamp will only blink during the movement of the magnet. By rapidly moving the magnet back and forth, you can generate an almost continuous supply of AC current and keep the bulb alight.
How would a meter be connected in a circuit too measure the voltage at a light bulb?
When connecting a volt meter to a light bulb to measure the voltage of the light bulb, run a third wire from where the wire enters the bulb to one terminal of the voltmeter and a fourth wire from the other side of the bulb to the other terminal of the voltmeter.
Can you make a bulb glow more brightly by adding a second battery?
Yes, two batteries will make a light bulb brighter than one, provided that the batteries are placed in series. The brightness of the bulb is determined by the voltage, and placing two batteries in series rather than just using one increases the voltage.
