answersLogoWhite

0

Get your bulb, it should be a very small wattage (weak) one, get your battery and wires, connect one wire to plus side of abttery and other wire to minus side of battery, then connect to the bulb, you may have to play around a bit to find a connection that produces light.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you make a battery light a light bulb?

Make a circuit with 2 wires a batery and a light bulb and touch wire to medle on light bulb


What can i make with a battery light bulb and copper wire?

you can make the light bulb turn on. Ooh ooh i know. it's a circuit!


What components do you need to make a simple series circuit to light a bulb?

You need a Battery, Light Bulb, Ammeter, Switch.


A complete what is needed to make a bulb light up?

To make a light bulb light up, you need a closed electrical circuit. This circuit typically consists of a power source (such as a battery or outlet), wires to carry the electricity, and the light bulb itself. When the circuit is complete and electricity flows through the bulb, it will produce light.


How do you make a light bulb light up using a 1.5 volt battery?

If it is a 1.5 volt bulb you can connect it through a series circuit directly to your battery. If the bulb is not made to run on 1.5 volts and needs another voltage, it may not light up!


How can I create a simple light bulb circuit using basic components?

To create a simple light bulb circuit, you will need a power source (such as a battery), a light bulb, and wires to connect them. Connect one end of the wire to the positive terminal of the battery, and the other end to one terminal of the light bulb. Then, connect another wire from the other terminal of the light bulb to the negative terminal of the battery. When the circuit is complete, the light bulb should light up. Make sure to use the correct voltage for the light bulb to avoid damaging it.


How can you make a circuit to find out if an object is an insulator or a conductor?

You can create a simple circuit with a battery, a light bulb, and wires. Connect the wires to the battery and light bulb, then touch the ends of the wires to the object in question. If the light bulb lights up, the object is a conductor as it allows the flow of electricity. If the light bulb does not light up, the object is an insulator as it does not allow the flow of electricity.


What do you need to make a simple series circuit to light a bulb?

To make a simple series circuit to light a bulb, the simplest components are a power source (such as a battery); a switch (to turn the power on or off); the bulb (obviously !); and some wires to connect everything together.


What will happen after you make an Electric Circuit?

If you connect the circuit properly the bulb should light up. That means attaching the left side of the battery to the right side of the bulb using a wire and attaching the right side of the battery to the left side of the bulb. If you do that the your bulb should turn on. If it doesn't then try changing the battery or the bulb.


How do you connect a wire to make the bulb light?

To connect a wire to make a bulb light up, you need to complete an electric circuit. This involves connecting one end of the wire to the positive terminal of a power source (such as a battery) and the other end to the bulb's positive terminal. Then, connect the negative terminal of the battery to the negative terminal of the bulb to complete the circuit and allow electricity to flow, causing the bulb to light up.


How do you make a circuit without a light bulb holder?

To make a circuit without a light bulb holder, you can connect the light bulb directly to the wires by using alligator clips or by twisting the exposed ends of the wires around the metal base of the bulb. Ensure that the circuit includes a power source, such as a battery, and that the connections are secure to allow for a complete circuit. Be cautious to avoid touching the bulb's glass while the circuit is powered, as it can get hot. Additionally, make sure the circuit is properly insulated to prevent short-circuits or electrical hazards.


What components do you need to make a simple series circuit to light on bulb?

You need a Battery, Light Bulb, Ammeter, Switch.