0
How do you fix an above ground pool that is full of water and not level?
Wiki User
∙ 15y ago
To level for an above ground pool simply take a full bucket of water and put a plastic tube in it that will reach every part of the area where you intend to put the pool. When the tube is full of water (NO AIR BUBBLES) You will find that the level at the end of the tube is always the same, so if you measure down from the water level in the tube at the lowest point of the slope where the pool is going to be you will know how much to dig out every where else.
Wiki User
∙ 14y ago
Wiki User
∙ 12y agoTo rig up a simple leveling system
- Fill a bucket up with water
- put the end of a clear plastic tube long enough to cover the job in the bucket and put something on it to stop it from floating to the surface of the water.
- suck the other end of the tube and get the water syphoning until there are no more air bubbles in the tube
- Lift the tube and you will note that the height water in the end of the tube will be the same as the level of the water in the bucket no mater where you take the tube so long as you don't allow any air rubles to form in the water.
- You can now use the water level at the end of the tube as a reference point for leveling any where within the length of the tube away from the bucket.
I suggest renting a sand pounder and put a large amount of sand, pound the heck out of it. Also, place a professional weed killer in the sand so that certain weeds will not grow up threw the liner.
Wiki User
∙ 8y agoWe used a laser level to make sure the blocks are the same height all the way around and a regular level to insure the individual blocks are level.
Wiki User
∙ 15y agoNot much you can do. You are stuck with the situation. Poor prep job.
Add your answer:
Earn +20 pts
Can an above ground pool be too full?
As a contractor, I can tell you for certain... if your pool isn't level, you won't be able to level it without ripping it out and replacing it, and you're owed money back from your contractor for a shabby job.
What zone in the ground is full of water?
a aquafer
Can you fill an above ground pool less than full height?
It has to be filled above the skimmer ( flow to pump) or else the filter will not work. Also, if too low the liner may dry out above the water line and cause it to shrink.
How do you check the Rear end fluid level 1999 tracker?
on level ground remove the center plug on the 3rd member rear side. if fluid is level with bottom edge, then is it full if fluld is not amber and clear, but cloudy , then it is water logged.
How far above the dipstick is a dangerous level of oil in a car?
Anything above max or full is not recommended.
How do you level ground?
Make up a water level, this consists of a clear plastic tube full of water with one end in a bucket of water Make sure the tube is long enough to cover the whole area of the proposed pool. you will note that the water level in the tube is always the same as that in the bucket and this will give you the reference you need to measure the slope in the land .
What is lake Lanier full elevation?
1071 feet above sea level.
Why Does atmospheric pressure decreased as you climb a mountain?
The atmosphere is full of layers and when you are at ground level, you have a maximum amount of air above you, but when you climb the mountain, the amount of air decreases and thus the pressure Hope that was helpful!
What do you do when your pool has too much water?
You could drain it down to the correct level if you feel better about it or you can just let it come down naturally and take advantage of the free water. I have a floating pool skimmer to keep my pool clean and it makes no difference whether my pool is full or nearly empty.
What is the full form of WLC?
Water level controller
We live in a flood zone and traditional above ground pools would be washed away Can you build a concrete pool above ground?
You can but you still have to make sure it is fastened to the ground and it is full at times of flood because they can float and can get washed away if they are not anchored to the ground.
How does tap water get cold?
Tap water temperature as "cold" is its normal temperature, depending on what your water source is. Underground water usually from wells/reservoirs is about 55 degrees, where as some parts of the country water comes from above ground lakes/reservoirs, and there the temperature will vary. Its warmer in the summer and can get really really cold in the winter as the above ground water temperature drops.
