By placing in a box with sand to shape the metal.
The metal is heated until molten (liquid) a mould is made using silica sand or another property that the molten metal will not adherer to. The molds are normally in 2 halves to allow them to come apart following cooling. The mould is filled to a predefined level and the mould left to cool for a period of time specific to the cooling rate of the metal concerned. The mould is opened and the mold also known as the rough cast is released to be worked on to a level of finish required.
A mold is a form into which molten metal is poured. When the metal hardens, it takes the shape of the mold. This process is called casting.
That in which metal is cast; a mold., A bar or wedge of steel, gold, or other malleable metal, cast in a mold; a mass of unwrought cast metal.
That in which metal is cast; a mold., A bar or wedge of steel, gold, or other malleable metal, cast in a mold; a mass of unwrought cast metal.
The metal would need to be past its melting point to work in a bullet mold. For example, if the metal was stainless steel, the temperature is 1510 degrees Celsius.
a mold or mould is hollowed out that is filled with liquid like plastic , glass , metal , or ceramic raw materials.
Casting is the process of pouring liquid metal into a mold. The metal cools and takes the shape of the mold.
Foundry is a technology of casting metals into shapes by melting them into a liquid, pouring the metal in a mold, and removing the mold material or casting after the metal has solidified as it cools.
You melt the metal and pour it into a thin mold the size of the wire you want.
ingot :D
Casting
There are plenty of vases made of metal. Stainless steel is preferred, as it won't collect mold.
get some metal and mold it or hire a proffesional.