I guess you want to change brake pads right?? to do that you need to disarm the caliper from the original position,, then, the caliper piston need's to be adjusted back so you can put in place the new pads,,so you need to "screw" the piston,, if you look at the piston, it has a cross lines,, in that lines you can use a large screw driver or something like that to turn the piston,, turn clockwise to insert the piston to the back position,, after that you dont need to open it again,, it will auto adjust on its position when you press the brake pedal 4 or 5 times,, (all this procedure its for the rear disc calipers,,for the front calipers you just need to prees it down). Jesus S...
I need to replace the back window of a 1999 Nissan Altima how do I do this
back of assembly and twist.
it is on the back side of engine under intake--the bolts are on trans side got to them w/ air intake hose off
Relax belt by holding automatic belt tensioner with large socket and/or breaker bar
it is on the back side of engine under intake--the bolts are on trans side got to them w/ air intake hose off
1994 Nissan altimas wontcrank uless i spray starting fuildinto air breather then cut back off
Hood, headlights, front fenders, bumpers. Chrome strip on the back. There's also some minor differences in the interior materials.
The headlight adjustment screws on a 2001 Nissan Altima are located on the sides and back of the headlight assembly. They allow for small changes to be made to the position of the beams.
Simply visit the website www.crutchfield.com and fill out the info of your make, model, and year. With this info the site will direct you to speakers that will fit in the front and back.
I took my fuse block apart on my 2005 altima and can not find a diagram to put it back together can you help me?
behind the engine sensor at top of the back of the transmission
my 97 altima gex back wwindows will not go back up . I have replaced all a10 fuses still will not move