You need to clarify this a bit. If you are using the manufacturers remote to operate someone else's device then you need to contact the manufacturer of the remote. Example..If you have a Sony TV and the remote will operate any VCR too then you need to contact Sony. There are remotes that will run any device like One For All remotes. This one you can go online and get. Actually most of these can be found at the manufacturers sites if you have internet capabilities to download their manuals .
The code required for a Coby TV will vary depending on the TV itself and what remote you are programming. Some codes you can try when programming your remote are 505, 607, 625, and 633.
brought a rca remote tryin to use on a magnsonic tv
Here are some Sharp TV programming codes for a universal remote: 004/ 009, 079, 095, 111, 112, 114, and 122. These codes once entered will allow the universal remote to control a Sharp TV.
If your instructions aren't available, use the link to Thompson's instructions for the RCA remote.
Try running the universal remote programming codes until one works. There should be a sheet of codes that came with the remote. If that doesn't work than chances are that you may have other problems with the TV.
The duration of Paid Programming - TV pilot - is 660.0 seconds.
you can either get them at supercheats.com or gamespot.com and put the manaphy event for the ar codes
No, but TV can broadcast violent programming.
television programming that targets and is made for a limited audience
There are hundreds of codes for the Newstar universal TV remote. The codes for the Alleron television is 051. The codes for Audiovox is 053. The codes for Bradford is 053. There are many websites that offer these codes.
Didn't erase programming when I tried it....
By a programming cd. But it into the tv
i want the tv haier codes for universal manette
You can obtain a full list of computer troubleshooting codes from most General Motors dealerships. You can also obtain the codes from a certified mechanic.
U codes should be addressed first. They are communication codes that could affect effective programming.
Paid Programming - TV pilot - was created on 2009-11-03.
You can find Sky Remote TV codes at the Sky official website. They list all the codes for several different brands of televisions. If you cannot find the codes there, then your television may not be supported.
Promotional codes for UFC Fights for Pay Per View events can be obtain from the television provider. Since the payments for such events are made directly to the television provider, any promotional codes must be accepted and applied by them.
It is television programming that targets and is made for a limited audience.
Your TV brand has codes that correspond to that model. We use one of these codes to operate your TV. Without knowing your TV brand, I'm not able to provide the codes but I can provide you the instructions for programming the remote to your tV.Remotes: Basic (Television Only) Turn the Television On.Press and hold the clear TV button for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
i dnt knw
Yes. You need an HD Television to watch programming in high-definition. You can get HD programming from cable or Satellite TV - Satellite TV offers more HD choices.
Television X do not publish legitimate free access codes.
I consider Television programming decisions are structured, as they need to fit into a tightly timed schedule.