Want this question answered?
The car beeps to let you know your door is open so you don't drive away while your door is open or ajar
it should be on the left side of the dash when you open the door
I locked the keys in a 2006 Mazda Tribute. Can you use a sim jim to open the door?
With the key.
This is how to program a Mazda protege keyless (also works with other Mazda models) remote system: 1. Open Drivers door and leave open. 2. Lock and unlock the drivers door using the power lock switch on door panel. (not sure if this is required) 3. Insert key into the ignition. 4. Turn key to the ON and OFF position 3 times in 10 seconds. Leave key in ignition. ( i have seen others say 24 seconds for 4 & 5 combined) 5. Open and close drivers door 3 times ending with door in the open position. (you can depress the door switch instead) 6. Door locks should respond by locking and unlocking. 7. Press any button on remote 2 times. Doors should lock and unlock. 8. If programming a second remote press any button 2 times on it and door locks should cycle again. 9. Remove key from ignition and door locks will cycle again. 10. Test remotes. This information was received from: How do you program a keyless entry remote for your Mazda 5
== == depends a lot, first start with removal with the door panel and look for any unhooked rods connecting to the locking mechanism Add lots of lubicant on metal rod where they connect to locking mechenism had problem this winter door will not open
To program a Mazda # remote first open the driver car door and leave open, then lock and Unlock the drivers door using the power door lock switch on the door. Put your key into the ignition and turn it on then off and repeat this 3 times in 10 seconds. Leaving the key in the off position, open and close your driver's side door 3 times, and leave door open. You should hear a locking and unlocking once then press #1 on remote and doors should lock and unlock.
You can open a key lock on a door knob, or you can open a deadbolt lock on the door itself.
Use a hammer.
Slide the card through the slot where the lock is by the door. Set the card where the lock would be. Now open the door.
open your glove box..at the back of it you see the ECM.
Open Hood. Open the hood of your Mazda 5. The hood release is located under the dashboard of your 5.