answersLogoWhite

0

This is how to program a Mazda Protege keyless (also works with other Mazda models) remote system:

1. Open Drivers door and leave open.

2. Lock and unlock the drivers door using the power lock switch on door panel.

(not sure if this is required)

3. Insert key into the ignition.

4. Turn key to the ON and OFF position 3 times in 10 seconds. Leave key in ignition. ( i have seen others say 24 seconds for 4 & 5 combined)

5. Open and close drivers door 3 times ending with door in the open position.

(you can depress the door switch instead)

6. Door locks should respond by locking and unlocking.

7. Press any button on remote 2 times. Doors should lock and unlock.

8. If programming a second remote press any button 2 times on it and door locks should cycle again.

9. Remove key from ignition and door locks will cycle again.

10. Test remotes.

This information was received from:

How do you program a keyless entry remote for your Mazda 5

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you program an advanced keyless remote for a 2009 Mazda 6?

You have to take it to a Mazda Dealership or locksmith.


Which fuse is for keyless entry in Mazda Protege?

In a Mazda Protege, the fuse for the keyless entry system is typically located in the fuse box under the dashboard on the driver's side or in the engine compartment. The specific fuse number can vary by model year, but it is often labeled as "Keyless Entry" or "Door Locks." Always refer to the owner's manual for the exact location and specifications for your particular model year. If the keyless entry is not functioning, checking this fuse is a good first step.


Does the remote for key less entry in a 2006 Mazda 3 contain trunk release If so which button does that?

No, the only features on the 2006 Mazda 3 Keyless Entry Remote is Lock, Unlock, and Panic.


How do you program the keyless entry remote for a 2004 Mazda-3?

You need one of these: http://en.wikipedia.org/wiki/Amstrad_CPC_664


How do you change thermostat on a 1999 Mazda protege?

where is the thermostat on a 1999 mazda protege?


Where is the EGR valve on a 1992 Mazda Protege?

Were is the egr on a 1992 mazda protege


Where is the alarm reset button on a Dodge Journey?

On your keyless remote.On your keyless remote.


Where is the headlight relay in 1992 Mazda Protege?

Where is the headlight relay in 1992 Mazda Protege?"


Where is the thermostat location on Mazda protege 2003?

Where is the thermostat location on mazda protege 2003?


Where is the ignition coil on a 2002 Mazda protege?

Where is the igniyion coil on a2002 mazda protege


Is the 1994 Mazda protege an obd-I?

Yes the 1994 Mazda Protege is a OBD 1 port


When do you change the Mazda Protege timing belt?

Every 60,000 miles in a 93 Mazda Protege