You may need to break into the hood to get it to work. Taking the vehicle in to a mechanic can be helpful in getting the release to work again.
Open the hood and look see.
Open hood, passenger side, look between the engine and the firewall. It's down there.
UNDER THE HOOD THERE IS A COMPARTMEN TOWARD FRONT OPEN UP AND BULB IS THERE
horns are behind the front bumper. With the hood open, Open the drivers headlight (plastic) panel on top of the back of the headlights and look straight down the hole....
With the hood open, on the passenger side there is the overflow container for the rad. The cap might be pressurized if the engine is hot. You add the antifreeze there.
Open the trunk. Look for a white tag with five numbers on the hood hinge arms. If not there or has been removed, contact your dealer.Type your answer here...
From the outside.
Pull the hood release
The hood release is inside. Once you have pulled the release the hood opens backwards.
To open the hood on the 2000 Beetle if the hood release lever is broken inside the car, you can remove the glove compartment of the vehicle and find the release cable inside the dashboard. Pull the cable to open the hood. You will then need to replace the hood release lever.?æ
Just open's and close's the valves.
4.6 L engine. Do you mean how do you check the fluid? Hood open, passenger side, between the back of the engine and fire wall, theres the dip stick.