Wiki User
∙ 2008-12-19 03:21:39You do not ,you replace it .
Wiki User
∙ 2008-12-19 03:21:39To override a neutral safety switch, locate it (it should be at the base of the steering column) and remove the green and brown wire. Connecting these two wires together will bypass the safety switch and your reverse lights will turn on.
There isn't a neutral safety switch but a clutch switch that is located under the dash on the clutch pedal.
JEFF TAYLOR
It is on the drivers side of the transmission
Need to know if it is standard or automatic and why.
On my 2002 S-10 truck, the neutral safety switch (also called the Park Neutral Position Switch, or PNP switch) is located on the driver's side of the transmission. It is a black box that has 2 electrical connections going into it. There is a very good chance that it is in the same location on your 2000 Blazer. Hope this helps.
it should be on the driver side mid rear of the transmission
where is the neutral safety switch on gm safari
Vakavtchiev and Violin invented the neutral safety switch.
How do you replace the safety neutral switch on a 1995 Jeep Cherokee 5-speed transmission and Where is the safety neutral switch located?
Begin by removing the wiring from the 2002 Chevy Cavalier neutral safety switch. Remove the neutral safety switch retaining screws. Reverse the process to install your new neutral safety switch.
where do you install a neutral safety switch on a 1996 saturn