0
Whoa, IT IS NOT A GOOD IDEA TO PAINT YOUR OLD DIVING BOARD !! Painting the board will hide any defects or damaged areas of the board. Any signs of cracking, peeling, spalding, chipping or anything else that may indicate that the board is about to fail are all hidden with paint. The last thing you may want is for the board to split in two or splinter when someone is in the midst of using it. This may cause a person or child to have severe harm done to them or even a fatality. For peace of mind have the old board replaced or removed entirely. A diving board is nothing but a liability. You may even be avoiding a potential law suit with it's removal. k
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How many 6 x 6 blocks can be made out of a 4 foot board?
Assumption: 6 x 6 is using inches as the unit (half a foot) and a 4 foot board means 4 square feet of board. Each square foot of board can be cut into four half foot x half foot pieces. Therefore, the 4 foot board would be able to make 16 half foot x half foot (6 inch x 6 inch) blocks.
What is a foot board for?
6"x 6" x 1" = 1 bd. ft.
How big is a board foot?
A board foot is 12 inches by 12 inches by 1 inch thick. A board 6 inches wide, 24 inches long and 1 inch thick is still 1 board foot. Any combination of the three measurements that add up to the first, 12x12x1 is considered 1 board foot.
How much paint would it take to paint a home 1328 square foot?
Approximately 4 gallons.
How much would you charge to paint a fence 6 foot high x 165 foot long?
That would depend on whether you had to pay for paint, how much paint costs, how many coats you need to give it, and how fast you can paint. If I have to buy the paint, I would ask at least $200 to give it one coat of cheap paint, with no guarantees.
How old should you be before you go off a diving board?
you should be about 6 if not if you cant swim use a life jacket if your under this age that cant swim
at a swimming gala, a student stands on a 9m high diving board and dives 15m to touch the bottom of the pool how deep is the pool?
6m
Where can you find a diving board base for a 6 foot Aquaslide 'n dive?
I purchased mine through "POOL MART" in San Antonio. The base is a (4) bolt stand that looks like a tooth for a 6 ft. board.They are not cheap at about $350.00 apiece. Aquaslide "n" Dive has a web site but sells for the same money on the internet. Good Luck!!
How much per square foot to install base board moulding?
Not enough information to answer this question! anyway, It's usually not priced by the sq ft, but by the lineal ft. In Nevada for the 3 or four inch paint grade base the piece price was about 6 to 10 cents per foot. for stain grade base the price varies widely depending on the height, type of o.s. corners and many other factors. The price can vary from 6 cents per foot to well over a buck a foot.
What are the 6 different types of pools nspi talks about for diving boards and how do you know you're getting the right board and water envelope?
NSPI wrote the book on diving board and pool specs. They, not too long ago, lost a gigantic law suit involving boards and pool measurements. They had to file for bankruptcy. So if they cannot get it right no one can when it comes to law suites. Since the suit, diving boards have become a huge liability.
What is foot board?
A piece of wood 1" thick by 12" wide by 1' long, or the equivalent volume. The width and thickness are often planed down some. So, let's say you have a 6" wide board 2' long and 1" thick. That is 1 board foot. Or, let' s say you have a 6" wide hunk of lumber 2" thick and 1' long. That is 1 board foot. Or, to get out of the box, here, say you have a 4" by 4" hunk of lumber that is 0.75 feet long (9") long. That is 1 board foot. In other words, if you multiply the width in inches by the thickness in inches by the length in feet, you have the number of board feet.
What is squared in algebra?
squared is when you multiply a number by itself... 6 squared is 6 X 6 = 36...so a 6 foot long board which is 6 feet wide is 36 square feet.
