intake manifold
DI means Direct Injection. Diesel engine depending on combustion categorised in Direct injection or InDirect injection Engine. Direct Injection engine combustion takes place directly above the piston. But indirect injection combustion initially takes place pre-combustion chamber and after transfered to above piston.DI engine more fuel efficient, easily start in cold condition, But Noise more.
NO. There is alot more to a 98 350 then just fuel injection. That year truck MUST have ALL the electronic engine sensors on it and working are the transmission will not even work. The 76 350 has NO place for the engine sensors to go. So it won't work.
Place something to catch the engine coolant beneath your 1990 Chevy Corsica radiator. Remove the radiator drain plug with a 9/16 ratchet. The engine coolant will drain out.
Chevy did not have a 350 in 2001 engine options were 5.3, 6.0. or big block
Yes. You will need to mount the engine 60degrees, however.
between the engine and the muffler underneath the car would be the logical place.
1995 Chevrolet Astro, 4.3 V6 engine with Single Point Injection System has one O2 sensor located in exhaust pipe (between catalitic converter and the place where exhaust pipes from right and left cylinder heads meets in one pipe).
You can drive your 2005 Chevy Trailblazer 4.2 liter engine with salt the air box cover in place. It is not recommended to do so, because cost particles can get into your engine.
TBI stands for: Throttle body injection. That is what took place of the carburetor and it's mounted on the top center of the engine under the air cleaner on the intake manifold. It looks like a carburetor but it's not, it has 2 fuel injectors in the top of it.
The starter should be place around the bottom front of the engine by the oil pan...
You fill in the same place you check it at the top left above your engine
if it is a hei ignition there is a place on the distributor cap that says tach.