How do you program a Autopage XT-75lcd autostartalarm?

Answer 1

PROGRAMMING THE XT-75LCD TWO-WAY LCD SCREEN REMOTE TRANSMITTER

Important Note: This program mode is for XT-75LCD two-way LCD transmitter programming only; do not program

other style transmitter on this mode.

Note: This mode will only retain the last 2 remote transmitters programmed. If the transmitter memory is exceeded, the

security system will start deleting transmitters from memory in chronological order.

The two-way LCD screen remote transmitter can be program to operate this system. The two-way remote transmitter

actively gives an immediate report to the remote transmitter on any violations occurred to your vehicle both by visual

graphic icon and audio sound.

When you press a button of a two-way remote transmitter, you can make sure that your command has been correctly

delivered to the system in your vehicle. The LCD screen will display a graphic icon as well as a confirming melody sound

from your two-way remote transmitter.

Enter:

1. Turn the Ignition 'switch 'OFF/ON' 3 TIMES and stay in ON position. Within 15 seconds.

2. Push the Valet switch 6 times holding in on the 6th push, until long chirp is heard. Then release the valet switch. You

are now in the two-way LCD screen remote Transmitter programming mode.

Program:

1. Press the Lock button on the transmitter until the siren responds with a confirming chirp; the first transmitter is now

programmed.

2. Press the Lock button on the second transmitter until the siren responds with a confirming chirp; the second transmitter

is now programmed.

Exit:

Turn Ignition to 'OFF' position, or leave it for 15 seconds. 3 long chirps & 3 parking light flashes will confirm exit.

Note: A Maximum of (2) two-way LCD screen remote transmitters can be programmed.

XT-75LCD TWO-WAY LCD SCREEN REMOTE TRANSMITTER