How do you program a keyless entry remote for a 1999 grand vitara?

Answer 1

---- xl-7 programming instructions first you need to stuff your head up under the dash and locate your module drivers side upper corner under dash does it say programmable transmitter (the first models had no programable modules) if it says that then......

1 confirm all doors are shut and key is out of ignition

2 open drivers door insert key and turn to on within 10 sec

3 turn ignition switch to off in 10 sec

4 push and release drivers door switch 3 times in 20 sec

5 turn ign. switch to on in 10 sec

6 turn ign. switch to off in 10 sec

7 press and hold lock and unlock button on transmitter for 5 sec within 20 sec of step 6 alldoors will lock/unlockto confirm correct process

8 press lock unlock buttons on second remote within 5 sec after step 7 once again all doors will lock/unlock to confirm

9 to add another remote up to a max of four repeat steps 1 through 8 this was taken directly out of an owners manual supplement that comes with a new keyless entry kit (part number for a xl-7 or grand vitara can't remember which one it goes to but it works on either one is 84900-67810) which you would have to purchase if yours is not programable these instructions are the same for vitara, grand vitara, xl-7 and the esteem hope this helps