Should work 1999-2006 Pontiac Montana. To create spare key: 1) Place alread programmed key into ignition. Cycle ignition from OFF - ON(RUN) - OFF. 2) Within 15 seconds, insert the new transponder key in the ignition. 3) Turn the key to ON(RUN) or START. 4) The theft "Security" light will go on then off. Turn key to "OFF" position. 5) The key will now start the vehicle.
I know if you just change the battery you hold down the lock and unlock at the same time for about 10 seconds. This will reset the transponder.
The dealership can generally program a new transponder key based on the VIN. Most good locksmiths can reproduce the key, but would need the original to do so.
how to program 2012 toyota fortuner
I don't program your transponder key. Try taking it back to a garage of the same type as your car e.g ford and they may be able to provide some help.
A Toyota Matrix transponder key is factory programed. At times this programing can fail. It is a quick process for the dealership to reprogram the key. A lost key and transponder will cost approximately $100 to replace depending on model.
Go to your Chrysler dealer and ask them to program it.
You can program a blank key for Mitsubishi Endeavor 2006 using Transponder Key Blank Fits.
You can't. Only a Toyota dealer can program the transponder key as it has a chip inside the key and has to communicate with the engine in order to start the car. Toyota dealer charges 1/2 hour of labor about $42 to program. Now the remote is easy...but not the key.
Programmer and PIN code required
The dealer has to use his scan tool to do it.
To program a Toyota rav4 tansponder Key one must go to settings. Once in settings there is a programming button that will allow you to program the key.
im guessing you need a flux capacitor......