Want this question answered?
Go to wikihow Go to search type in program door lock remote
Programing a remote key on a jaguar s type has to be done by a jaguar service center. Only authorized technicians should do it because often, people end up spoiling the remote system when they program it on their own.
geuss you have to have an already programmed remote control, to enable you reprogramme a second one your self without going to dealership. otherwise u need to see dealership who have codes on thier computers.
2004 jaguar s type how to set clock, program the car garge
1. Open the boot lid and drivers door, and switch on the ignition. Press central locking switch (in the centre console) 5 times. The siren will chirp to indicate it has entered learning mode. 2. Press the lock button of the remote, the system will chirp to confirm it has received the remote. 3. To program further remotes, press the central locking switch once. The system will chirp twice for remote number two, then press the lock button of the remote as above. 4. Wait for 30 seconds for the system to close and chirp twice. This basically resets the programming for the remotes.
switch won't work
You don't! I tried using a screwdriver to pry open the remote. The remote must be taken to a dealer and they change it. I was shocked when I found out, but it was fairly painless to have them do it.
If you have SKY on your remote type in 406 and it will show MUTV.
The door latches must need replacing. My 2002 X Type front door latches failed before the car hit 100K miles.
dont remove it yourself ask a mokanic to do it
The absolute most popular Jaguar is the D-Type. Others include the S.S. Automobile, the Jaguar XJ-S, the Jaguar XJ-13, the Jaguar E-Type, the Jaguar D-Type, the Jaguar MK II sedan, the Jaguar C-Type racing car, the Jaguar XK Sportwagen and the Jaguar XJ 220.
The s type inertia switch is located under the driver side door jam its usually red in color.