1. Get in the truck and close all doors
2. Put key in ignition (don't turn it)
3. Hold down unlock button on truck (don't release until step 8)
4. Turn key to on (turn it until just before starting the truck)
5. Turn key to off
6. Turn key to on
7. Turn key to off
8. Release the unlock button on the truck (This typically makes the locks toggle or the horn honk, etc.)
9. Hold both the lock and unlock button on the transmitter until the locks cycle
10. Repeat with additional remotes (up to 4)
11. Turn key back to on position to exit programming mode
Note:
This training process seems to work with most Chevrolet vehicles. At least, it's worked with all of mine.
Do steps 4-7 fairly rapidly, don't pause in between them.
You don't turn your car on during any point of this process.
How do i you program keyless remote for a 2004 malibu?
See "Programming the Transmitters" on page 10 in chapter 2 "Keys and Doors" of your "OWNER'S MANUAL".....
how do you program your keyless remote for 2003 Chevy blazer
How to program a keyless entry remote for 2008 Pontiac g5
How do I program a keyless remote for a 2007 Hyundai Azeva
How do u program a keyless remote for a 2000 GMC Yukon
I need instructions on how to program a keyless remote for a 1999 Cadillac Deville.
How to program a keyless entry remote for 2008 pontiac g5
how do you program keyless entry remote 98 GMC
With a scan tool.
How do you program a keyless entry remote for a 2005 KIA Amanti? Kent
You will need a scan tool to program this Keyless Fob.