you have to bring it to the dealership
To program a keyless remote for a 1997 Cadillac Catera, first, sit in the driver's seat and close all doors. Insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the "Lock" and "Unlock" buttons on the remote simultaneously for about 15 seconds until the doors lock and unlock, indicating successful programming. Repeat this process for additional remotes, and then turn the ignition off to exit programming mode.
To program a keyless entry remote for a 2005 Cadillac SRX, first, sit in the driver's seat with all doors closed. Insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the "Lock" and "Unlock" buttons on the remote simultaneously for about 15 seconds, then release. Finally, press the "Lock" button once more to complete the programming process; the locks should cycle to confirm successful programming.
I need instructions on how to program a keyless remote for a 1999 Cadillac Deville.
a
To reprogram the remote for a 2007 Cadillac DTS, first, get inside the vehicle and close all doors. Insert the key into the ignition and turn it to the "On" position (without starting the engine) and then back to "Off" five times within 10 seconds. After the fifth turn, leave the key in the "On" position, and the locks should cycle, indicating the vehicle is in programming mode. Press any button on the remote you want to program, and the locks will cycle again to confirm the programming. Repeat for any additional remotes, then turn the key to "Off" to exit programming mode.
To program a keyless remote for a 2004 Cadillac, first, sit in the vehicle and close all doors. Insert the key into the ignition and turn it to the "On" position without starting the engine, then turn it back to "Off." Repeat this step twice, then turn the key to "On" again and press any button on the remote within 30 seconds to complete programming. If successful, the locks will cycle to indicate that the remote is programmed.
It is easy to do with online instructions. Just google "2004 Jeep remote programming"
where
originalkeyless.com they have the remote and the programming for Mazda 929's
I need to see the brake diagram for a 95' cadillac sedan deville
To program a 2002 Cadillac Seville STS remote, first, sit inside the vehicle with all doors closed and the key in the ignition. Turn the key to the "On" position (without starting the engine) and then back to "Off" five times within 10 seconds. On the fifth turn, leave the key in the "On" position; the locks should cycle to indicate programming mode. Press and hold the "Lock" and "Unlock" buttons on the remote simultaneously for about 15 seconds until the locks cycle again, confirming successful programming.
What kind of remote do you have.