Up Your Nose
it is in the swimming pool lockers on the wall hanging up
go to the swimming pool and press on the orange bolly bouncing up and down
u cant pump them up. the drainer is the only way to pump them up. i have no idea how the drainer looks like. doesnt look like familiar or simalar to me.
Possible causes: holes, cracks in vac hose - bad lid o-ring on pump - pump seal leaking - cracked pump lid or housing - pump basket full of debris - cracked or broken plumbing between the pump and the skimmer/vac hose connector.
The toilet role is in the kisosk at the swimming pool. There is a guy there. Talk to him and he will tell u to come back the next day. So when u come back it will be up on a changing thingy. :)
If you search up how do you complete the bigfoot quest on panfu i google it will come up with a walkthrough... GOOD LUCK!!!!!!
you can decorate your very own tree house (if you are a panfu member) and dress up your panda. you can also go into different places on the map and explore around the lake and the swimming pool which makes your panda really happy. I hope this information helped answer all of your questions and you can make an account at www.panfu.com Enjoy! ;) Love ya! xxxxxxx
it is a fuel injected model, so the pump is inside the gas tank. you have to drop the tank, unplug the pump. you will probably need a big screwdriver, and a hammer to get the lockring off. hit the tabs sticking up, until ring turns. after you remove ring, you can pull pump up out of tank. be sure to replace sock filter on bottom of pump. installation is reverse of above.
the pump you have may be the rong one or you must use the greese that comes with the new pump and put it on the new O-ring then you must line up the tab facing the front and push down hard the pump is spring loaded so it will go down and the O- ring is a tight fit.
you keep playing games
Raise the back seat and on the drivers side there is an access panel with 4 screws. Remove the panel and there is the fuel pump. Unscrew the retaining ring and disconnect the wires. The pump come right out. Place the new pump in, tighten the retaining ring, hook the wires back up and replace the panel. DONE!