actually...reverse is down next to second instead of up next to first, after the downward pressing of the entire shift rod into the floor, move the shifter to the left toward your knee and back toward the front corner of your seat. there is a safety mechanism made of plastic in the bus transaxle which prevents accidental shifting from first into reverse when shifting into second. however, very few of these transaxles still have this safety mechanism in tact, often resulting in the accidental grinding of reverse while attempting the shift into second. hope this helps. :) the previous post reflects the proper shifting into reverse on Water-Cooled VW models, not air-cooled such as the bus or beetle.
1973 vw beetle
Physically fit? Yes, if it isn't a bus or a type III. There are some adjustments / changes you have to make to get it running and working well.
It depends. Generally, the answer is yes, as long it is bug to bug, or other like models. It is not true of the bus, as it changed engine formats right about then.
As long as the 73 isn't a super beetle then yes they should fit.
Assuming the US spec version with the 1.7l it will be 210mm, Countries that used 1.6l would have the 200mm.
According to the VIN you typed, the Volkswagen Official Service Manual indicates it is a 1973 (Kombi or Campmobile).
2001 vw beetle will not go into reverse
Yes It will. no problems. might have to pull and tug when you put it on.
Check the wires on the coil. If a couple are swapped to wrong positions, the car will run, but immediately stall when put in reverse.
The gross weight of a 1969 Volkswagen Bus is 2,723 pounds. The VW Bus was produced between 1968 and 1971.
The origanl price for a 1965 vw delux bus was $1,800.
This can't be answered with any accuracy. It depends on the bus (year) and required displacement. Labour? Takes a competent mechanic less than an hour to successfully install a bus engine.